Energy Meter Calibration Electro Technical Calibration Service Smart Prepaid Meter

EMPOWERED BY INNOVATION

EMPOWERED BY INNOVATION

EMPOWERED BY INNOVATION

About Ruvik India

Empowered by Innovation

Ruvik India is a next-generation technology company that helps enterprises reimagine their businesses for the digital age. Our technology products and services are built for innovation with extensive research and experience, and also offers customized products, services and IoT solutions that are aligned with business requirements. We delivers holistic services across industry verticals to leading enterprises.

Click for more detail

Smart Prepaid Meter

Metering Soulution

Over the last few years, Smart (Prepaid) Energy Meter has been proposed as an innovative solution aimed at facilitating affordability and reducing the cost of utilities. Resolution and accuracy of the meter have seen substantial improvements over the years. Introduction of the digital meter in the later part of last century has completely changed the way Electrical parameters are measured. Starting with Voltmeters & Ammeters, the digital meter has conquered the entire spectrum of measuring instruments due to their advantages like ease of reading, better resolution and rugged construction.

Click for more detail

GPS Vehicle Tracker

GPS Vehicle Tracker

Ruvik 4 Band Car & Bike GPS Tracker Real Time Tracking for Car Motorcycle Vehicle Tracking Device with 1 Year Tracking Software

  • GSM:850/900/1800/1900MHz GPRS: Class12,TCP/IP
  • Voltage supply:9~56v Working Temperature:-20-70° GPS Tracker size:88*45*13mm
  • GPS Module:U-blox Applicable models:lorry,car,truck,motorcycle.
    Positioning mode:GPS/GSM/GPRS Communication mode:GSM/SMS/GPRS
  • GPS Accuracy:≤ or =10m Locating Time Cost: Hot start:≤ 10secs
    Warm Start:≤ 32sec Cold Start:≤ 38sec
  • Product Required A Valid GPRS AND SMS activate SIM card and Tracking Application(Not Included)
Click for more detail

Electro Technical Calibration Service

Electro Technical Calibration Service

Calibration involves both types of applications where precision measurement and precision sourcing are required. A precision source is used to test a measurement instrument, and a precision measurement device tests a sourcing instrument. It is considered a requirement of good metrology to have a quality assurance program that incorporates a routine check of the lab’s calibrating instrumentation. Because of this, a lab should be equipped with precision measurement instruments with similar performance specifications to the lab’s precision sourcing instruments (both by functionality and spec). Routine inter comparison will then insure confidence in the consistency of the lab’s instruments and will detect problems early so proper corrective actions can be taken. Hence, it is considered best practice to have and use both categories of instrumentation in a calibration facility.

  • Energy Meters & Test Bench
  • Clamp Meters & Current Clamps
  • Voltage Meters
  • Watt Meters
  • Light Meters
  • Megohmmeters
  • Multimeters
  • Panel Meters
  • RCL Meters
  • Data Loggers
  • Function / Signal Generators
  • Ammeters (Clamp-on)
  • Contour Probes
  • High Resistance Meters
  • Frequency Counters
  • Power Harmonics Analyzers
  • Power Supply
  • Standard Resistors
  • Tachometer Calibration
  • Thermocouples & RTDs
  • and many more....
Click for more detail

Our Services

Electro Technical Calibration

Electro Technical calibration refers to the process of verifying the performance of, or adjusting, any instrument that measures or tests Electro Technical parameters.

NABL Accreditation Consultant

Ruvik India as NABL Accreditation consultant in Delhi. Our qualified Team will carry on the project in Testing and Calibration with the help of the NABL coordinator/Quality Manager.

24/7 On-site and Inhouse Support

Ruvik India and our Onsite service team is available 24 hours a day, 7 days a week throughout the year to Calibrate your manufacturing and test equipment. We have a professional dedicated expirenced support team for On-site calibration and Inhouse Calibration.

Faq Question

Measuring instruments are the 'heartbeat' of your company as they check and measure your production processes. They control the quality of your products and in the end are responsible for the success and the profitability of your business.A regular check of your 'heartbeat' with traceable calibration equipment ensures your quality always matches the customer's expectations, which is vital where ISO 17025 certification is involved.

This calibration is done under the guidelines of a national accrediting organization to the ANSI/ISO 17025 – 2017 standard and will be delivered with documentation according to the accrediting body.

If a calibration can be performed for you, you receive a calibration certificate on which the precise results, such as calibration number, measurement data, measurement uncertainties and signatures are noted by the staff. These calibrations are extremely important in precisely reconstructing all the dimensional standards and recording the inaccuracies in detail in an official prescript.

We calibrate equipment from most major manufactures, such as HP, HPL, Fluke, Agilent, Tektronix and many others – Equipment types include : Multimeters, handheld to 8 digit bench meters, Oscilloscopes – analog and digital, Current clamps, Frequency counters, Thermometers, Wattmeters, power analyzers, Multifunction and multiproduct calibrators, Voltage, current and resistance calibrators, Process calibrators, Standard resistors, Fluke Network Test Tools, Energy Meters.

Why Us?

Over the years, we have proved our credibility in the industry and created an indelible position. The following factors illustrate why we are different from our counterparts : We have all the necessary licenses required for a Service Provider. We have important contacts that help us carry our work easily and fast.

Our highly skilled professionals are aware how to do their work efficiently and are well trained in maintaining customer relations. Keeping in mind the current market scenario, each service we provide is economical. We guarantee complete satisfaction. Click for more detail

ISO 17025

ISO 17025: Traceable Calibration'Calibration' means that the test results from a measuring device (or source) of unknown accuracy, are compared with a device whose accuracy is known. This device is universally accepted as a 'reference'. Calibrations are traceable to the International System of Units (SI) through National Metrological Institutes, ratiometric techniques and natural physical constants.Calibration records any deviation from this standard and corrects it when necessary.

Each instrument has a specific calibration procedure which indicates exactly how and what must be checked. Regular and traceable calibration combines the forces of accuracy and certainty and provides you with the key aspect of ISO 17025 registration. Click for more detail

NABL Accreditation Consultant

If you are in the search of a NABL Accreditation Consultant who has years of experience NABL accreditation of laboratory, feel free to contact us anytime. National Accreditation Board for Testing and Calibration Laboratories (NABL) is an autonomous body under the aegis of Department of Science & Technology, Government of India, and is registered under the Societies Act. It has been established with the objective to provide Government, Industry and Society in general with a scheme for third-party assessment of the quality and technical competence of testing and calibration laboratories.

We help laboratories by providing training, documentation etc. Our professionals provide NABL Accreditation Services to the clients in a non-discriminatory manner and are accessible to all testing and calibration laboratories in India and abroad as well regardless of their ownership, legal status, size and degree of independence. Our qualified consultant will carry on the project in Testing, Calibration and Medical Laboratories with the help of the NABL coordinator/Quality Manager. Click for more detail

Welcome to our company ruvik India

Get A quote

Contact us

Call: +91 9821 994 994
Monday-Saturday (9am-7pm)

Email: sales[@]ruvikindia.com
Web: www.ruvikindia.com

Location: E-41, Galli No-3, Samaspur Road, Pandav Nagar, East Delhi,
Delhi - 110091, India - Earth
(Click for Location)

Your message has been sent. Thank you!
-->